Should choose electric bikes note the following:

1, the Electric Bikes the fastening screw nut should be tightened, not loose and fall off. 2, each rotating parts should be flexible operation, it may not have stuck, stay stiff phenomenon. Such as: front and rear wheels should rotate flexible, and should not swing around and up and down, it will be stopped when the front and rear wheels should do a brisk swing, not suddenly stop turning. Turning left and right should be flexible and comfortable handlebar, pedal axle and the crank should be tightened, not loose each other, and flexible rotation. 3, shift the car in the correct speed range strain gear, shift position should be clear, there can not be neutral in the middle. 4, the chain should be suitable elastic, flexible operation. Forward Reverse repeatedly shake hands crank sprockets, chains flexible operation, not a jump chain and shedding phenomenon. 5, with both hands above the front and rear part of the saddle, one hand firmly under the front of the presser saddle, saddle front-end can not be staying. Then hands horizontal turning of the saddle, the saddle should not be rotated. 6, the selection of brakes and brake system: hands holding the handlebars, while the front and rear brakes were about push bike, then the wheel should not rotate; release the handle, the brake system should be able to quickly reset. 7, each electric bicycle bike parts surface should be clean, no stains, rust, trademark decals should be complete, clear, no sharp edges burrs, etc., such as fender and chain guard edge should not have prickly feeling brakes and other end of the rope should be installed protective covers. 8, grade or label observe parts. Generally good parts are marked with significant trademark mark and clear and beautiful patterns, while lemons are rarely marked or rough.

Battery Care

he main power comes from the adult electric tricycles, most electric tricycle battery lead-acid batteries, so battery life affects driving distance electric tricycles, battery maintenance can start from the following six aspects.
1, correctly grasp the battery charging time to recharge a battery discharge depth of the best 60% -70%.
2, loss of electrical power loss state non-store that are not timely charge the battery use. Loss of power in the state of storage battery, it is prone to sulfate, lead sulfate crystals attached to the plates, plug the electric ion channels, resulting in insufficient charging, the battery capacity decreases. Idle state power loss longer, more severe damage to the battery. Therefore, the battery idle, it should charge it once a month, so that the battery can better maintain a healthy state.
3, avoid large current discharge electric car start, manned, uphill, please use pedal power, try to avoid momentary high-current discharge. Likely to lead to large current discharge lead sulfate crystals, to the detriment of the physical properties of the battery plates.
4, to prevent exposure to high temperature conditions may cause the battery to increase the internal pressure of the battery was forced pressure limiting valve automatically opens, a direct consequence of increased water loss of the battery, and the battery will inevitably lead to excessive cell activity decreased water loss, accelerate the plate to soften When charging the housing fever, from the drum housing, deformation and other fatal injuries.
5, to avoid loose plug fever Charger output plug charging, the contact surface oxidation and other phenomena can cause charging plug fever, fever for too long will lead to a short circuit charging plug, direct damage charger, lead to unnecessary losses. When we found out that the situation should be promptly removed oxide or replace the connector.
6, periodic inspection during use, if the electric car to continue the mileage sudden drop ten kilometers in a short time, it is likely that the battery pack at least one battery has broken grid, plate softening, electrode active material shedding short circuit. At this point, it is timely to professional battery repair mechanism for inspection, repair, or with a group. This can extend the life of the battery pack relative to maximize cost savings.

Three electric tricycle repair

three wheel electric tricycl vehicle maintenance include checking the whole car all screws, nuts are solid, the control performance is good, whether the tires need to be replaced, the mechanical system is good, the battery capacity is standard, brush motor maintenance once a year. Specific maintenance as follows:
(1) vehicle comprehensive commissioning, check the electrical control wiring for hidden faults, electrical cable for damage, if any should be excluded on the spot;
Before and (2) adjusting the brakes, brakes ensure flexible and reliable;
(3) the steering handlebar is reliable, whether there is mutual handlebars and front fork slip phenomenon;
(4)electric 3 wheel bicycles regularly check the battery (check once a month in summer, winter check once every 2-3 months) whether the battery level in the following marking, if the plate is exposed, it is necessary to replenish distilled water. (Note Do not add acid, since it has been adjusted by the ratio of electrolyte concentration, acid will destroy every block battery factory already pH balance, causing plate corrosion, affecting battery life.
(5) The first time the use of attention within the rear axle gearbox to add gear oil, then periodically check whether the rear axle gearbox oil leak, seal damage, lack of lubrication phenomenon, timely replacement of gaskets, add oil.
(6) Transmission, motor sprocket, chain regularly add oil, such as badly worn should be replaced, so as not to affect the use.
(7) Vehicle fastening bolts regularly again, check for loose, fall off phenomenon, a suitable liquid rust, rusty screws to avoid causing birth of maintenance difficulties.
(8) the vehicle clean, Sassafras test clean.

Ensure bus safety

Electric Tricycle security beginning from the time of purchase, you can see, to ensure that the process of using electric tricycle safety, consumers buy when they have to start to pay attention. Regular factory protection systems are more perfect, line materials and components interfaces are more formal. Consumers do not freeloaders, must choose the regular manufacturers or well-known brands of electric tricycle type.
In addition, consumers should pay attention to battery electric tricycle and standardize operations in the use of the process, prevent overcharge and over discharge. To take measures to cool the Electric Tricycles battery after heating, until the temperature of the electric tricycle battery before charging back to normal. Electric tricycle battery installation position should be as to ensure good heat dissipation, overheating should be found to stop charging, electric tricycle battery charger and respond checked. Electric tricycle battery discharge depth is shallow or high ambient temperature should shorten the charging time.
Electric tricycle battery discharge to the termination voltage, to continue to discharge as over-discharge. Discharge will seriously damage the battery electric tricycle, electric tricycle electrical performance and cycle life of the battery is extremely unfavorable. Overall, consumers in the purchase of electric tricycle not only price, mileage and other factors determine the quality of a car, line materials, member contact is good is equally important. And must not have short-circuit the battery, be especially careful when installing or using, tools used insulation measures should be taken, when electrical connection even better than the first battery, the check no short-circuit, and finally even the electric tricycle battery, wiring specification should be well insulated to prevent overlapping compression to rupture, the only way to make electric tricycle safer, more long-term use.

Electricity as an environmentally friendly

Electricity as an environmentally friendly, clean, conversion rate of vital energy, is widely used in the production and life, in order for the application of electricity to drive the vehicle replacement, promoting the development of low-carbon transport sector, to reduce transportation costs, save energy , protect the environment, it is an important research topic around the world, after decades of development, has been used in city electric bicycle, industrial electric transport vehicles, electric city sanitation cleaning vehicles, engineering, tunnel, subway construction and other special vehicles and many other areas.
Electric tricycle for its applicability, flexible, easy maintenance, easy maintenance, low cost, etc., can be flexibly walk through the narrow road between. Electric tricycle with a reverse switch, can easily achieve inverted with features that road narrow alley, the alley is very practical, either with parking are very convenient. Widely used in households, urban and rural, individual lease, factory, mine, sanitation, community cleaning and other short-distance transport fields.

Electric car battery

Electric Tricycle security beginning from the time of purchase, you can see, to ensure that the process of using electric tricycle safety, consumers buy when they have to start to pay attention. Regular factory protection systems are more perfect, line materials and components interfaces are more formal. Consumers do not freeloaders, must choose the regular manufacturers or well-known brands of electric tricycle type.
In addition, consumers should pay attention to battery electric tricycle and standardize operations in the use of the process, prevent overcharge and over discharge. To take measures to cool the electric tricycle battery after heating, until the temperature of the electric tricycle battery before charging back to normal. Electric tricycle battery installation position should be as to ensure good heat dissipation, overheating should be found to stop charging, electric tricycle battery charger and respond checked. Flyhorse Electric Bicycles  battery discharge depth is shallow or high ambient temperature should shorten the charging time.

Flyhorse three wheel bikes fully preheated before driving it

Flyhorse fully preheated before driving three wheel bikes
Winter morning, the outdoor temperature is low, the vehicle is allowed to stand overnight after the oil has been fully returned to the crankcase lubrication camshaft, rocker arms and other remote parts of the poor, it must be fully warmed up before driving 3 wheel bikes, the correct method is as follows :
1, the vehicle linked into a block, gripping clutch implementation of several meters, so that the friction of the oil film resistance is reduced, in order to mitigate the impact Guadang;
2, hang neutral, continuous step 5 to 6 times the start lever, the role of the pre-ignition start before pump oil lubrication;
3, turn the ignition switch, foot or electric start;
4, idle warm-3 minutes to 8 minutes (according to temperature may be).

In normal use of 3 wheel electric bicycles

In normal use of 3 wheel electric bicycles, the excess current is typically occur in manned, uphill, it occurs at the start. Uphill driving activity and the start is very easy situation encountered, from the perspective of maintaining the battery power bicycle life, the driver can help to reduce the need for pedal power output to achieve the purpose to avoid too large current. Regular battery rated at less than the current output of the state, can also cause crystallization. Excessive deficit means no timely charge the battery after use, so that it uses shorter period. Therefore, the battery should be promptly charged, if the long-term need, but also to maintain the charging time in January, so you can ensure that the battery is active.